kl-serisi-ana-gorsel

KL Series - Colocation Rack Cabinets

Built on the successful KabinPLUS product platform, KL Series colocation cabinet’s design maintains outlook continuity and operation functionality in data center aisle applications in combination with full height KD Series cabinets.

bolmeli-kabinet

Structural Design Continuity

All superior features of full height KD Series, such as frame strength and door perforation is preserved in KL Series collocation cabinets.

180-derece-acilabilen-kapilar

Doors With 180 Degrees Opening Angle

• Enabling 180 degrees opening angle, door hinges provide convenience during device installation or maintenance operation and eliminate aisle blockage. This feature is preserved even if hinges of adjacent cabinet doors are positioned next to each other. 
• Changing opening direction of doors can easily be made at site whenever needed. 
• Front and rear doors have perforation rate of 85% and single point locking feature.

mustakil-montaj-profilleri

Independent Mounting Rail Adjustment

• There are four separate 19 inch mounting rail in eachcompartment.
• Each mouting rail can independently be adjusted in depthdirection.
• Unit indicators are marked on both front and rear rails.

kilit-secenekleri-1kilit-secenekleri-2

Lock Options

• Combination lock
• Mechanical lock with key
• Electronic lock with keypad
• Electronic lock with card reader
• Electronic lock with remote control

guvenli-ve-mustakil-kablo-yolu-2

Secure and Separate Cable Routing

• Cable ducts inside the cabinet allow safe and discreterouting of data and energy cables entering from topand/or bottom.
• Metal cable ducts on both sides create two alternativecable routes to each compartment.
• Cable duct design is symmetric and allows entry from top orbottom on both sides or inverted at opposing sides.
• Reserve space for additional cable duct can be used ifcable routing between compartments is needed for aspecific application.
• The cable duct openings are protected with specialgaskets, and internal structures of the ducts are designed to ensure there are no sharp edges or protrusions along thecable routes.

dikey-hava-kapama-seti

Vertical Air Dam Set

• Provide energy efficiency in combination with air flowmanagement solutions in aisle applications.
• Air dams are positioned on both sides of each section.
• Do not prevent adjustment of mounting rails.
• Knockouts for cable routing allow cable passage accessoriesto be used whenever needed.

kl-serisi-teknik-ozelliklerkl-serisi-teknik-ozellikler-1
  • Compatible with EN 60297-3-100 and EIA-310D for 19 inchequipment mounting
  • Grounding and protection circuit comply with EN 60950
  • 1500 kg static load capacity in compliance with EN 61587-1 andUL 2416
  • Mounting rails, top panel, side panels and doors are electrically bonded to the cabinet frame. Additional grounding terminal is fixed on the frame for common bonding network connection.
  • Perforated doors have 85% relative open area - calculated in compliance with DIN 24041 Perforated Plates Standard
  • Unless otherwise stated standard packaging is used.Please refer to page 100 for packaging details.
  • Steel frame and two sets of vertical mounting rails in eachcompartment. All mounting rails can be adjusted independently indepth axis - both front and rear mounting rails have unit indicationmarkings.
  • Full metal leveling feet set with a high corrosion resistance coating 1500 kg load carrying capacity.
  • Standard type castor set is designed for transfering empty cabinets to initial place of use - each can rotate 360 degrees.
  • Grounding terminal bracket for connecting to common bonding network
  • Two sets of fixed side panels
  • Full-width, perforated font and rear door with single-point lock at each compartment
  • Door hinges can be opened 180 degrees even if they are positioned back to back with the hinges of adjacent doors. If opening direction of doors is desired to be changed, it can be easily made on site.
  • Metal cable ducts at both sides create two alternative cable route for each compartment.
  • The design of the cable ducts is symmetrical and allows entry from the top or bottom on both sides, or from the top at one side and from the bottom at the other.

Colocation Cabinet - 42U

Width

Height

Depth

600 mm

42U

1000 mm

800 mm

1100 mm

1200 mm

Colocation Cabinet - 47U

Width

Height

Depth

600 mm

47U

1200 mm

800 mm

1100 mm

1200 mm

kl-serisi-standart-olculer